it stick to most surfaces and can hold up to 3lbs per sq. inch. It’s the ultimate installation solution, for exterior displays and other DIY projects where extreme adhesion is required.
Quick Application Tips:
For best results, surfaces should be cleaned with a 50-50 mixture of isopropyl alcohol and water.
Refrain from touching the adhesive to avoid contamination.
Apply tape vertically on the back of the object for even weight distribution.
Remove the liner and ensure object alignment with the preferred surface.
Make a firm press to create a strong, permanent bond.
Use a heat gun or steamer to reduce adhesion.
Lift the edges with a sharp, flat tool.
Peel the edges slowly in one direction at an acute angle.